Ofis
Ayazağa Mah. Mimar Sinan Sok. Seba Office Boulevard D Blok No: 48
Telefon: +90 212 215 52 54
E-Posta:[email protected]
Fabrika
Veli Köy OSB Mah. 6.Cd No:18/1
Çerkezköy / Tekirdağ
Ofis
+90 212 215 52 54
Fabrika
+90 212 215 52 54
Çalışma Saatleri
- Pazartesi-Cuma: 09:00 - 18:00
- Cumartesi: Kapalı
- Pazar: Kapalı
Office
Ayazağa Mah. Mimar Sinan Sok. Seba Office Boulevard D Blok No: 48
Phone: +90 212 215 52 54
E-Mail:[email protected]
Factory
Veli Köy OSB Mah. 6.Cd No:18/1
Çerkezköy / Tekirdağ
Office
+90 212 215 52 54
Factory
+90 212 215 52 54
Working Hours
- Monday-Friday: 09:00 - 18:00
- Saturday: Close
- Sunday: Close
MYS 350
MYS 350
Grinding aid for whit cement
MYS 350 is a high performance economical grinding aid which is specifically formulated for white cement in order to increase mill capacity.
• Improved performance in both closed and open circuit systems at equal specific surface area or equal sieve residues.
• Increased mill production (12% to 30%) depending on the efficiency of the equipment and the characteristics of the material to be ground.
• Reduced grinding energy costs.
• Improved physical properties of the ground material.
• Cement particle size distribution is improved resulting in more thorough hydration.
• Reduces plastic shrinkage (initial set)
• Powder flow characteristics are improved before,during and after storage.
• Packset tendencies and coating are substantially reduced.
• Physical state : Liquid
• Colour : Colourless
• pH (20°C) : 11± 1
• Specific gravity : 1.06 ± gr/cm3
• Chloride content : < % 0.1
• Alkali Content : < %1 Na2O equiv.
Packaging
• Bulk tanker loads (where appropriate).
• 1000 liter containers and 215 liter drums.
Storage
The quality is guaranteed for 18 months starting from the manufacturing date provided the product is not altered with other chemicals. Do not mix with any other product. MYS 350 will not freeze above -15°C.
Applicable for all types of cement
Directions for use
Dosage: The dosage range is from 0.2kg to 0.7kg per metric tone of material to be ground. Industrial trials are required to determine the optimum dosage.
Procedure: A dosing pump is required to introduce the correct dosage into the mill. MYS 350 may be add directly into the mill or onto the feed conveyor belt.
Our technicians are ready to provide advice and assistance in the use of MYS 350
Health and Safety: If MYS 350 comes into contact with skin, flush with water immediately.
Fire: MYS 350 is non flammable (F.P.>100°C).
Cleaning: Spillage of MYS 350 can be removed with water.
Overdose: Dosages in excess of 3kg/ metric tone should be avoided.
