Ofis
Ayazağa Mah. Mimar Sinan Sok. Seba Office Boulevard D Blok No: 48
Telefon: +90 212 215 52 54
E-Posta:[email protected]
Fabrika
Veli Köy OSB Mah. 6.Cd No:18/1
Çerkezköy / Tekirdağ
Ofis
+90 212 215 52 54
Fabrika
+90 212 215 52 54
Çalışma Saatleri
- Pazartesi-Cuma: 09:00 - 18:00
- Cumartesi: Kapalı
- Pazar: Kapalı
Office
Ayazağa Mah. Mimar Sinan Sok. Seba Office Boulevard D Blok No: 48
Phone: +90 212 215 52 54
E-Mail:[email protected]
Factory
Veli Köy OSB Mah. 6.Cd No:18/1
Çerkezköy / Tekirdağ
Office
+90 212 215 52 54
Factory
+90 212 215 52 54
Working Hours
- Monday-Friday: 09:00 - 18:00
- Saturday: Close
- Sunday: Close
RAW 100
RAW 100
Raw mill grinding aid - high performance
RAW 100 is an admixture specifically formulated to improve the grinding of raw mill in the cement industry. It is also recommended for the grinding of limestone, chalk, and other raw materials.
• Increased mill production (from 6% to 15%) depending on the efficiency of the grinding installation and the characteristics of the raw material to be ground.
• Reduced grinding energy costs.
• Improved particle size distribution.
• Increased mill production and/ or energy savings achieved at equal sieve residues (63, 90, 100 µm).
• Improved flow characteristics of raw feed before, during and after storage.
• Clinker quality may be improved.
• Form : Liquid.
• Active ingredients : Aqueous solution of hydroxylated components.
• Specific gravity at 20°C : 1.085 kg/ dm3 (± 0.015).
• pH at 20°C : 4.5 (± 1.5).
• Chloride content : < 0.2%.
• Alkali content : < 0.1%.
Other characteristics
• Colour : Dark brown.
• Freezing point : < -15°C.
• Flash point : Non flammable product.
• Dry matter (solids content) :
Packaging
• Bulk tanker loads (where appropriate).
• 1000 liter containers and 215 liter drums.
Storage
The quality is guaranteed for 12 months starting from the manufacturing date provided the product is not altered with other chemicals. Do not mix with any other product. RAW 100 will not freeze above -15
• Metric Grinding of raw meal for cement manufacturing (dry or wet process).
• Grinding limestone, chalk etc...
Directions for use
Dosage rates: The dosage range is from 0.3kg to 1.5kg/ tone of material to be ground.
The dosage will vary according to the hardness of the material being ground and the target fineness. Industrial trials are required to determine the optimum dosage.
Typical dosage rate is 0.4kg/ metric tone.
Procedure: Liquid admixture ready-to-use.
A dosing pump is required to introduce the correct dosage into the mill.
RAW 100 may be introduced either directly into the mill or onto the feed conveyor belt. The addition point of the product may prove significant.
Health and Safety: If RAW 100 come into contact with skin, flush with water immediately. In case of contact with eyes, flush with water immediately and seek medical advice.
Fire: RAW 100 is non flammable.
Cleaning: Spillage of RAW 100 can be removed with water (refer to Safety Data Sheet).
Overdose: Dosages in excess of 3kg/ metric tone should be avoided.
Our technicians are ready to provide advice and assistance in the use of RAW 100.
