Ofis
Ayazağa Mah. Mimar Sinan Sok. Seba Office Boulevard D Blok No: 48
Telefon: +90 212 215 52 54
E-Posta:[email protected]
Fabrika
Veli Köy OSB Mah. 6.Cd No:18/1
Çerkezköy / Tekirdağ
Ofis
+90 212 215 52 54
Fabrika
+90 212 215 52 54
Çalışma Saatleri
- Pazartesi-Cuma: 09:00 - 18:00
- Cumartesi: Kapalı
- Pazar: Kapalı
Office
Ayazağa Mah. Mimar Sinan Sok. Seba Office Boulevard D Blok No: 48
Phone: +90 212 215 52 54
E-Mail:[email protected]
Factory
Veli Köy OSB Mah. 6.Cd No:18/1
Çerkezköy / Tekirdağ
Office
+90 212 215 52 54
Factory
+90 212 215 52 54
Working Hours
- Monday-Friday: 09:00 - 18:00
- Saturday: Close
- Sunday: Close
MYS 410
MYS 410
GRINDING AID- Strength Enhancer
MYS 410 is a grinding aid which is specifically formulated to increase the mechanical strengths of cement. Especially early-age mechanical strengh is concerned.
• Increased mill production Reduced grinding energy costs.
• Improved physical properties of the ground material.
• Improved performance in both closed and open circuit systems at equal specific surface area orequal sieve residues.
• Bulk density is increased.
• Powder flow characteristics are improved before,duringand after storage.
• Packset tendencies and coating are substantially reduced.
• 10 to 30 minutes reduction of setting time Cement particle size distribution is improved resulting in more thorough hydration.
• Reduces plastic shrinkage (initial set).
• Physical state : Liquid
• Colour : Brown
• Active ingredients : Aqueous solution of organic, inorganic and modified amines
• pH (20°C) : 9.50 (+/-1,0)
• Specific gravity at 20°C : 1.200 kg/dm3 +/- 0,01
• Freezing point : < - 5°C
• Flash point : 110°C
Packaging
• Bulk tanker loads (where appropriate).
• 1000 liter containers and 215 liter drums.
Storage
The quality is guaranteed for 12 months starting from the manufacturing date provided the product is not altered with other chemicals. Do not mix with any other product. MYS 410 will not freeze above -5°C.
Applicable for all types of cement
Directions for use
Dosage: The dosage range is from 1.0kg to 3.0kg/ metric tone of material to be ground. Industrial trials are required to determine the optimum dosage.
Procedure: A dosing pump is required to introduce the correct dosage into the mill. MYS 410 may be introduced directly into the mill or onto the feed conveyor belt.
Our technicians are ready to provide advice and assistance in the use of MYS 410.
Health and Safety: If MYS 410 comes into contact with skin, flush with water immediately.
Fire: MYS 410 is non flammable (F.P.>100°C).
Cleaning: Spillage of MYS 410 can be removed with water.
Overdose: Dosages in excess of 5kg/ metric tone should be avoided.
